AMSOIL Synthetic Multi-Purpose Grease is qualified against the highest grease standards and designed for multiple-use applications. Composed of premium-quality synthetic base oils and calcium sulfonate complex thickeners, Multi-Purpose Grease provides exceptional film strength, shear resistance, adhesion properties and mechanical stability.
Package sizes include:
3-oz. Cartridges (not sold individually, comes in a pack of 3)
3-oz. Cartridges (case of 10)
14-oz. Cartridge
14-oz. Cartridges (case of 10 & 40)
35-lb. Lug
120-lb. Keg
400-lb. Drum
AMSOIL Synthetic Multi-Purpose Grease is the preferred choice for medium to high ambient temperatures, sleeve-type bushings, high shock-loading environments, wet environments and wheel bearings and other automotive applications.
AMSOIL Synthetic Multi-Purpose Grease is recommended in heavy- and light-duty applications found in manufacturing facilities, automobiles, agricultural and construction equipment. These include, but are not
limited to, roller bearings, plain bearings, thrust bearings, gears, electric motors, presses, winches, bushings, wheel bearings, chassis lubrication, universal joints, ball joints, tie-rod ends and steering knuckles.
AMSOIL Synthetic Multi-Purpose Grease is qualified against the highest grease standards and designed for multiple-use applications. Composed of premium-quality synthetic base oils and calcium sulfonate complex thickeners, Multi-Purpose Grease provides exceptional film strength, shear resistance, adhesion properties and mechanical stability. It excels in temperature extremes by providing excellent oxidation stability, high-temperature dropping point and low-temperature torque value and pumping capability. AMSOIL Synthetic Multi-Purpose Grease is formulated with oil soluble extreme-pressure additives for heavy loads, as well as oxidation and corrosion inhibitors.
PERFORMANCE FEATURES
Resists thermal and oxidation degradation
Excellent
water-washout resistance
Outstanding low-temperature pumpability and torque value
Adhesive and shear stable to prevent squeeze out
Excellent load-carrying and EP performance
Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fittings clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Do not over-grease, as excessive heat buildup can result. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.
AMSOIL Synthetic Multi-Purpose Grease is compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Multi-Purpose Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL INC.
AMSOIL Synthetic Multi-Purpose Grease is available in 3-oz. cartridges, 14-oz. cartridges, 35-lb. lugs, 120-lb. kegs, 400-lb. drums and in a 3 oz. cartridge grease gun kit.
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS).
Click here to view the MSDS Data Sheet for AMSOIL GLC.
Keep out of the reach of children. Don't pollute. Return used oil to collection centers.
| Typical Technical Properties | ||
| Synthetic Multi-Purpose Grease | GLC | NLGI GC/LB Requirements |
| Thickener | calcium sulfonate complex | NR |
| NLGI consistency grade | 2 | NR |
| NLGI performance grade | GC-LB | NR |
| Penetration (ASTM D-217) (25°C [77°F], 0.1 mm) worked 60 strokes | 282 | 220-340 min |
| Dropping point, °F (°C) (ASTM D-2265) | >540 (>282) | 428 (220) min |
| High temperature life, hours (ASTM D-3527) | 120 | 80 min |
| Water washout, percent (ASTM D-1264) | 1.70 | 15 max |
| Rust and corrosion (ASTM D-1743) | pass | pass |
| Oil separation, percent loss (ASTM D-1742) (24 hours, 25°C [77°F]) | 0 | 6.0 max |
| Leakage, g lost (ASTM D-4290) | 4.2 | 10 max |
| Four-ball wear test, mm scar (ASTM D-2266) | 0.40 | 0.60 max |
| Fretting wear, mg (ASTM D-4170) | 2.3 | 10 max |
| Four ball EP, kgf (ASTM D-2596)Weld pointLoad wear index | 62074 | 200 min30 min |
| Timken OK load test, lbs (ASTM D-2509) | 70 | NR |
| Low-temperature torque, N•m (ASTM D-4693) (-40°C [-40°F]) | 6.4 | 15.5 max |
| Oil viscosity, 40°C (104°F), cSt | 165 | NR |
| Color | red | NR |
| Texture | smooth with tack | NR |
| NR: Not required for NLGI GC-LB labeling | ||
Canada
United States
Reviewed by Chip:
Excellent chassis + bearing grease
New (better) Calcium Sulfonate formulation.
Been using this grease in -40 to 120+ for the past 15 years, chassis & wheel bearings in all my 4 x 4 vehicles.